OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission

Looking for reliable OCTG ERW and Seamless Steel Tube Tubing? Our factory offers API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping, and Transmission.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Transport Package
Packed in Bundle or Wooden Box
Trademark
Permanent Steel Manufacturing Co., Ltd
Origin
China
Production Capacity
200000/Tons

Product Description

OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission
Product Description:
The oil casing is a steel tube used to support the well wall of oil and gas Wells to ensure the normal operation of the whole well during the drilling process and after completion.  Several layers of casing are used for each well, depending on the drilling depth and geology.  Cement is used for cementing after casing well. Unlike tubing and drill pipe, cement can not be reused and belongs to disposable consumption material.  As a result, casing consumption accounts for more than 70% of all well tubing.  

Casing can be divided into: conduit, surface casing, technical casing and reservoir casing.  
 

Special petroleum pipe is mainly used for drilling oil and gas Wells and oil and gas transportation It includes oil drilling pipe, oil casing, extraction pipe The oil drill pipe is used to connect the drill collar to the drill bit and transfer drilling power.  The oil casing is mainly used to support the well wall during drilling and after completion to ensure the drilling process and the normal operation of the whole oil well after completion.  The suction pipe mainly conveys oil and gas from the bottom of the well to the surface.  

The oil casing is the lifeline to maintain the operation of oil well.  Due to the different geological conditions, the downhole stress state is complex, and the comprehensive effect of tension, pressure, bending and torsion stress on the pipe body has put forward a higher demand on the quality of the casing itself.  If the casing itself is damaged for some reason, it can lead to production loss or even abandonment of the entire well.  
 

According to the strength of steel itself, casing can be divided into different steel grades, namely J55, K55, N80, L80, C90, T95, P110, Q125, V150, etc.  Well conditions, different depths, the use of steel grade is also different.  In corrosive environment, the casing itself is required to have corrosion resistance.  In the complex geological conditions, it is also required that the casing has anti-collapse performance.  
 

The pipe is inserted into the hole and fixed with cement to help separate the wellbore from rock formations and prevent collapse, while also allowing drilling mud to circulate to facilitate drilling.  Casing end processing type: short round thread, long round thread, partial trapezoidal thread, special buckle, etc.  It is mainly used to support the well wall during drilling and after completion to ensure the drilling process and the normal operation of the whole well after completion.  Different types of casing used in oil extraction: The surface casing protects the well from shallow water and gas, supports the wellhead equipment, and maintains the weight of other layers of the casing.  The technical casing separates the pressures at different levels to allow the flow of drilling fluid and protect the production casing.  In order to install blowout preventers, leak preventers and liner in the well.  Oil reservoir The oil casing extracts oil and gas from reservoirs below the surface.  Used to protect drilling and to layer drilling mud.  Casing sizes range from 114.3 mm to 508 mm.  


Protects the well from shallow water and gas contamination, supports the wellhead equipment and maintains the weight of other layers of the casing: 
The technical casing separates the pressures at different levels to allow the flow of drilling fluid and protect the production casing.  In order to install blowout preventers, leak preventers and liner in the well.  

Reservoir Casing - To drain oil and gas from reservoirs below the surface.  Used to protect drilling and to layer drilling mud.  Casing sizes range from 114.3 mm to 508 mm.  

The types and packing of petroleum casing are divided into short thread casing and its coupling and long thread casing and its coupling according to SY/T6194-96" petroleum casing ".  

 

Drill pipe is a type of steel pipe with screw bars at the end that is used to connect the rig's surface equipment to the drilling and grinding equipment or bottom hole unit located at the bottom of the drill.  The drill pipe is used to transport drilling mud to the drill bit, and with the drill bit to raise, lower, or rotate the bottom hole device.  Drill pipe must be able to withstand tremendous internal and external pressure, distortion, bending and vibration.  Drill pipe can be used multiple times during oil and gas extraction and refining.  

The light pipe and raw steel pipe are made into drill pipe after several processing steps.  First, through the processing of steel pipe thickening process, the surface of the light pipe is inward bent, and the steel pipe wall is thickened.  Next, threads are threaded and copper plated to increase strength.  This is followed by a non-destructive quality control inspection followed by welding of the pipe body joint.  The tube is then subjected to welding heat treatment and welding final treatment to eliminate welding residual pressure.  Other tests, including hardness tests, pressure tests and non-destructive tests, should be carried out on finished pipe before finished pipe is painted and packaged.  

The length of drill pipe is usually about nine meters.  

 

Casing Pipe, Steel Casing Pipe, Well Casing:

Sizes:

Out Diameter: 1.315"- 20"
Wall Thickness: 0.133"-0.500"
Length:R1(group1),R2(group2),R3(group3) 

 

Materials & Grades

Casing: J55, K55, N80, L80, P110
 

Application:

oil well extracting 

borehole 

borewell

 

Types:

Seamless Casing

ERW Casing

 

Connections:

P(Plain end)

STC (short threads)

LTC (long threads)

BTC (buttress threads)

Premium gas-tight connectors

Non-upset ends (NUE)

External upset ends (EUE)

Premium gas-tight connectors

Others special connectors

 

Chemical compositions of casing pipe

Standard Grade Chemical compositions(%)
API SPEC 5CT J55 C Si Mn P S Cr Ni Cu Mo V
K55 0.34~0.39 0.20~0.35 1.25~1.50 ≤0.020 ≤0.015 ≤0.15 ≤0.20 ≤0.20 / /
N80 0.34~0.38 0.20~0.35 1.45~1.70 ≤0.020 ≤0.015 ≤0.15 / / / 0.11~0.16
L80 0.15~0.22 ≤1.00 0.25~1.00 ≤0.020 ≤0.010 12.0~14.0 ≤0.20 ≤0.20 / /
P110 0.26~0.395 0.17~0.37 0.40~0.70 ≤0.020 ≤0.010 0.80~1.10 ≤0.20 ≤0.20 0.15~0.25 ≤0.08

 

Mechanical properties of casing pipe

Grade Type

Total elongation 

under load

 (%)

Yield strength

 (min)Mpa

Yield strength 

(max)Mpa

Tensile strength 

min Mpa

Hardness 

Max (HRC)

Hardness 

Max (HBW)

J55 - 0.5 379 552 517 - -
K55 - 0.5 379 552 655 - -
N80 1 0.5 552 758 689 - -
N80 Q 0.5 552 758 689 - -
L80 1 0.5 552 655 655 23 241
L80 9Cr 0.5 552 655 655 23 241
L80 13Cr 0.5 552 655 655 23 241
C90 - 0.5 621 724 689 25.4 255
C95 - 0.5 655 758 724 - -
T95 - 0.5 655 758 724 25.4 255
P110 - 0.6 758 965 862 - -
Q125 All 0.65 862 1034 931 - -

 

Casing Pipe Manufacturing Process:
Steel ingot heating → hydraulic punching → reheating → extension → periodic rolling → reheating → sizing → cooling → straightening → pipe cutting → inspection
1. An annular heating furnace is required for ingot heating;
2. Punching and reheating with hydraulic press;
3. The oil casing plant uses a two-roller guide plate extension machine for extension;
4. Re-use a disc heating furnace for periodic rolling, and use a non-entry furnace for reheating, cooling, straightening, pipe cutting, and inspection.

Grades: E75, X95, G105, S135

 

Drill Pipe
2-3/8" to 7-5/8" OD, Range 2 and 3

Heavy Weight
2-3/8" to 6-5/8" OD, Range 2 and 3

Drill Collars
2-7/8" to 14"

 

Connection threads: NC26, NC31, NC38, NC40, NC46, NC50, 5 1/2FH.6 5/8FH.
Internal Upset: IU, EU, IEU


Heavy weight drill pipe is a medium-weight drilling pipe, (referred standards in API SPEC 7-1). It has bigger wall thickness than common drilling pipe and smaller than drill collar. 

 

Mechanical Properties API Steel Drill Pipe

Grade E-75 X-95 G-105 S-135
Yield Strength (minimum psi) 75,000 95,000 105,000 135,000
Yield Strength (maximum psi) 105,000 125,000 135,000 165,000
Tensile Strength (minimum psi) 100,000 105,000 115,000 145,000

 
Latest project:
OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission


About us:
Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.
 
The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions. Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.

OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission

Besides,we have two advanced three-layer PE anticorrosive pipe production lines, which can carry out three-layer PE and FBE anticorrosion for steel pipe with diameter of 20mm to 1820mm, as well as epoxy asphalt anticorrosion production line, steel-plastic composite pipe production line, internal and external plastic coating and plasticlining production line, and cement mortar production line for inner wall of steel pipe. The annual anticorrosion production capacity reaches 18 million square meters.  Since its establishment, the company has formed a good cooperative relationship with many domestic and foreign steel pipe manufacturers, gas companies and oil companies, and its sales network covers many countries.  


Experimental Equipment:
OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission

PMC team:
OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission
Customer visit:
OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission
End Users:
OCTG ERW and Seamless Steel Tube Tubing Oil, Casing&Drilling Pipe API 5CT J55, K55, N80 L80, T95, P110, Q125 for Oil Drilling, Well, Pumping and Transmission

Our advantage:

1. Full projects reference all of the world and vendor references from the most main oil and Gas in stitute, companies, investors
2. The inspection program is full supported to the docs requirements
3. The list of producing equipment and inspection equipment will be provided
4. The relative shipping docs, third party inspection report, Mill test certification, custom appreciate letters
5. The mill certification such as API monogram , ISO ect....
7. ITP, MPS & ISO manual
8. Prices competitively level
9. Full presentation experiences and guidance
10. Engineering design & construction capacities
11. Financial supports, various of payment term could be acceptable such as L/C, T/T.
12. Free custom inspection corporation & checked corporation in CCPIT
13. Full bank supported company with a perfect line of Credit "AAAAA"
       ect

 

FAQ

 

Q: How long is your delivery time? 


A: Depends on pipes size and quantity. 7-10 days for stocked steel pipe and 20-40 days for new productions according to quantity.bowl shape stainless steel smoking pipe screens

Q: Do you provide samples? Is it free or extra? 201 Stainless Steel Pipe used for Food and Chemical Industry
A: Yes,we could offer free steel pipe sample for your evaluation. stainless steel pipe fitting

Q: What is your terms of payment? steel pipe

A:  TT payment way, TT+LC, or  100%  sight LC and usance L/C for 30-120days,the specific payment should be addressed by further discussion.




 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours